|
公司基本資料信息
|
|||||||||||||||||||||||||
直升飛機起降甲板防滑涂料具有哪些性能要求？
What are the performance requirements for anti-skid coatings on helicopter takeoff and landing deck
直升飛機起降甲板防滑涂料是一種特殊的涂料品種，它有著普通涂料的一些必要性能，還有著一些其他的特殊性能，下面我們來了解下直升機起降甲板防滑涂料有哪些性能要求。
The anti-slip coating on the helicopter takeoff and landing deck is a special type of coating that has some necessary properties of ordinary coatings, as well as some other special properties. Let's understand the performance requirements of the anti-slip coating on the helicopter takeoff and landing deck.
為確保符合中國民航局（CAAC）發布的《直升機水上平臺運行規則》（AC-135-FS-011）以及英國民航局（UK CAA）對海上直升機降落區域標準CAP437的要求，北京捷潤新特自動化控制技術有限責任公司（Jront Control Technology Co.,Ltd）使用先進的Findlay Irvine uGT便攜式摩擦系數測試儀進行細致的摩擦測試。
To ensure compliance with the Operating Rules for Helicopters on Water Platforms (AC-135-FS-011) issued by the Civil Aviation Administration of China (CAAC) and the requirements of the UK CAA's standard CAP437 for helicopter landing areas at sea, Jront Control Technology Co., Ltd conducted detailed friction tests using the advanced Findlay Irvine uGT portable friction coefficient tester.
我們通過這樣嚴謹?shù)臏y試流程，有效地保證了直升機甲板上始終保持著合適的表面摩擦水平，讓操作員能夠?qū)崟r監測摩擦值的變化，并在必要時迅速采取措施，防止甲板摩擦系數的降低，從而確保直升機著陸區的安全，降低運營成本，同時也有助于延長直升機甲板本身的使用壽命。
Through such a rigorous testing process, we effectively ensure that the appropriate surface friction level is always maintained on the helicopter deck, allowing operators to monitor changes in friction values in real time and quickly take measures when necessary to prevent a decrease in deck friction coefficient, thereby ensuring the safety of the helicopter landing area, reducing operating costs, and also helping to extend the service life of the helicopter deck itself.
1、 涂層具有良好的彈性和柔韌性。它是鋼結構用的戶外涂料，需要承受每天和一年四季溫度變化，從而產生的熱脹冷縮形變。如果涂層的彈性和柔韌度不足，形變就會導致涂層開裂、剝離和脫落。
The coating has good elasticity and flexibility. It is an outdoor coating used for steel structures, which needs to withstand daily and seasonal temperature changes, resulting in thermal expansion and contraction deformation. If the elasticity and flexibility of the coating are insufficient, deformation can lead to cracking, peeling, and detachment of the coating.
2、 涂層具有好的防滑性和耐磨性，摩擦系數大。甲板防滑涂料的主要特點是摩擦系數大，摩擦系數越大，防滑性就越好。摩擦系數大、防滑系數好的甲板防滑涂料，可以有效防止因為海浪顛簸造成飛機的側滑和人員摔傷。
The coating has good anti slip and wear resistance, and a large coefficient of friction. The main characteristic of deck anti slip coating is a high coefficient of friction, and the higher the coefficient of friction, the better the anti slip performance. A deck anti slip coating with high friction coefficient and good anti slip coefficient can effectively prevent aircraft sideslip and personnel injuries caused by rough waves.
3、 涂層具有好的耐海洋氣候性、耐海水和耐鹽霧性。海洋環境會容易使鋼材的腐蝕加劇，涂層應該有很好的附著力和密封性，可以阻止水汽和鹽霧的滲透，確保鋼底材不受腐蝕。
The coating has good resistance to marine climate, seawater, and salt spray. The marine environment can easily exacerbate the corrosion of steel, and the coating should have good adhesion and sealing properties, which can prevent the penetration of water vapor and salt mist, ensuring that the steel substrate is not corroded.
4、 涂層要有好的保護性，使用壽命長久。甲板防滑涂料應該耐日光暴曬，耐干濕交替變化、耐腐蝕、耐油污。直升飛機起降甲板面積很大，涂裝一次比較費工時，用量也大，所以需要壽命長久。
The coating should have good protection and a long service life. The deck anti slip coating should be resistant to sunlight exposure, alternating dry and wet changes, corrosion, and oil stains. The area of the helicopter takeoff and landing deck is large, and painting once is time-consuming and requires a large amount of time, so it requires a long service life.
5、 涂層踩踏需要舒適。甲板是船員經常活動和行走的地方，所以涂層踩踏舒適是很重要的。
Coating requires comfort when stepping on. The deck is a place where crew members often move and walk, so coating for comfortable stepping is important.
6、 以上就是直升飛機起降甲板防滑涂料的一些性能要求。直升飛機起降甲板防滑涂料用于涂裝大型艦船艦載直升飛機起降甲板和機庫的地面。所以需要它具備一些符合的特殊性能。
The above are some performance requirements for anti-skid coatings on helicopter takeoff and landing decks. Anti slip coating for helicopter takeoff and landing decks is used to paint the ground of large ship based helicopter takeoff and landing decks and hangars. So it needs to have some special performance that meets the requirements.
